 | | Breathing Air System | |
Technical specification
Series: DAP
Flow rate: 0.15 to 13.33 m³/min
|
 |
Compressed air may be used for breathing only after it has been correctly treated. It may not contain any contaminants such as moisture, solid particles, oil or oil vapors, carbon monoxide, carbon dioxide, sulphur dioxide, nitrous oxide or hydrocarbons. Carbon monoxide is particularly dangerous as even in minute quantities it quickly causes disorientation and incapacity. The KAESER breathing air system meets all the quality requirements of international standards such as OSHA, CSA, AS, DIN/EN 12021 and even according to European Pharmacopeia (Pharmacopèe Europèene).
|
Advantages:- Breathing air to legal requirements
- The KAESER breathing air system employs five stages of treatment to obtain pure air: Series FC prefilter to remove fluid droplets, dust, dirt, rust, oil and other particles larger than 1 µm. Fitted with an ECO DRAIN electronic condensate drain; with filter monitor and filter monitor box
- Series FE microfilter to remove particles and aerosols down to 0.01 µm. Fitted with an ECO DRAIN electronic condensate drain; with filter monitor and filter monitor box
- Heatless regenerating desiccant dryer of the DC series, equipped with ECO CONTROL II partial-load controller (from DAP 12 upwards), adsorption of water vapor and carbon dioxide, dries the compressed air to a pressure dewpoint of -40°C
- Activated carbon adsorber and catalytic converter for adsorption of hydrocarbon vapours, acid components and oxidation of carbon monoxide to carbon dioxide
- Series FD particle filter downstream; with filter monitor and filter monitor box
|
|
