 | | Hybritec Combination Dryer | |
Technical specification
Serie DT
Flow rate 20 to 150 m³/min
|
 | (Calculation applies to: DTL 833/1101, 1/3 summer / 2/3 winter operation, 8760 operating hours per year, 0.15 €/kWh) |
|
System comparison (Total lifetime) Compared with conventional desiccant compressed air dryers, no other system comes close to Hybritec dryers when it comes to lowest total lifetime costs. This is mainly due to the Hybritec’s lower energy consumption and the fact that these versatile dryers become even more cost-effective as energy prices increase. Hybritec dryers are also cleaner and therefore require less maintenance and, because they require less energy, are more environmentally friendly.
|
| Compact, turnkey unit Hybritec dryers are quick and easy to install. The system, which uses standardised components, is installed ready for operation on a base frame. Quick, easy, effortless.
(Image shows DTG to DTI series)
|
| Automatic temperature sensing Equipped with a dependable thermostat control system, Hybritec dryers are able to automatically switch from frost protection operation at colder times of the year to pure refrigeration dryer mode during the warmer months.
|
| 10-year desiccant service life The reduced thermal and mechanical demands that are placed on the Hybritec's desiccant dryer section not only significantly extend desiccant service life, but also mean that less desiccant material is actually required. Service costs are therefore kept to an absolute minimum.
|
|