 | | SECOTEC® – Energy savings all day, every day | |
|
| |
|
 | Energy savings all day, every day, with SECOTEC® Control
The high capacity thermal mass is cooled down to cut-out temperature by the refrigeration circuit and extracts the heat from the compressed air that flows through the heat exchanger. As soon as the temperature of the thermal mass rises to the cut-in temperature the refrigerant compressor starts and cools it down again. This feature considerably reduces power consumption compared with non-cycling controllers.
|
 | Minimal pressure drop means more energy savings
The air/air and refrigerant/air heat exchangers are equipped with generously sized copper piping to ensure minimal pressure drop. SECOTEC dryers do not require a pre-filter, which means that costly pressure drops caused by additional filters are avoided.
|
 | Dependable, intelligent condensate drainage
The ECO-DRAIN is fitted with an intelligent level-sensing control that prevents pressure loss when the condensate is drained from the air system. When the collector tank is full, the level sensor opens a diaphragm valve and the condensate is drained off without pressure loss.
|
 | Efficient stainless steel condensate separator
A deflector plate forces the compressed air that streams into the separator into circular motion. The air then flows through a stainless steel wire mesh that ensures 99.9 % water separation from the air. This allows the required pressure dew point of +3 °C to be reliably maintained. The stainless steel separator tank*) is completely corrosion resistant.
|
 | Industrial quality control cabinet for increased safety
Every SECOTEC dryer is EN 60204-1 compliant and is tested for electromagnetic compatibility in accordance with applicable EMC standards. Unlike equipment conforming to VDE 0700, SECOTEC dryers conform to a strict industrial standard and are therefore equipped with a control cabinet to IP 54, a control transformer and fuses for the control and power circuits. The whole system is designed with maximum safety and reliability in mind.
|
 | User-friendly operation
Due to its convenient position on all models, the control panel can be viewed at a glance, whilst a dew point trend gauge integrated within the panel monitors dryer operation. System features include: Emergency/Off switch, LEDs to indicate “Thermal Mass Active” and “Refrigerant Compressor ON”. All of these features provide ease of operation and further increase system reliability.
|
 | Simple, cost-effective servicing
All components in SECOTEC dryers are easily accessible when the unit’s panels are removed. Service valves are also provided to make inspection of the refrigerant circuit as simple as possible. Furthermore, the condenser is located at the front of the dryer, which allows possible dirt accumulation to be quickly spotted and rectified. Logical component layout and the tower design not only enable maintenance work to be carried out easily, but also significantly reduce servicing requirement and therefore costs.
|
 | Unrivalled reliability
High quality, generously-sized components (e.g. in the condenser) ensure optimum flow at all times, even at high operating temperatures, and guarantee a long and dependable service life, e.g. stainless steel condensate separator*). Details, such as the use of smooth-bore piping in the refrigeration circuit, also contribute to exceptional system efficiency.
* TA 5 model uses a zinc die-cast condensate separator
|
|
SECOTEC 
