 | | TG – TI Series Refrigeration Dryers | |
Technical specifications
TG – TI Series
Air flow: 30.8 to 90 m³/min
|
|
Savings day after day
Energy-saving dryers from Kaeser Kompressoren enable significant savings all day, every day. For example, at 40% airflow they consume only 43% of their nominal energy requirement. This represents energy cost savings of approximately 54 % when compared with a conventional dryer with hot gas bypass control.
In addition, each unit is fitted as standard with a timer which allows further savings to be made, e.g. in periods of low demand and downtime, such as during work breaks and the weekend - every kilowatt saved reduces CO2 emissions and consequently benefits the environment. Moreover, extra savings of approximately 1000 Euros per year are possible if the dryers are used in air systems with redundant compressed air treatment and drying capacity, i.e. operating at 50 to 70 percent of rated compressed air flow.
Energy saving with KAESER
For example:TH 451at 40% flow rate:
Annual energy saving:
€ 1,643 = 2.5 kW x (0.93 - 0.43) x 8760 h/year x 0.15€/kWh
(Power consumption at 40% flow volume: 2.5 kW)
CO2– reduction:
9.68 t CO2 /year; 98.6 t CO2 /10 years (1000 kWh power = 0.6 t CO2 emissions)
|
 | High-efficiency refrigerant compressor
A calibrated solenoid valve adjusts the size of the refrigerant compressor’s compression chamber according to the volume and temperature of the compressed air to be cooled. This ensures that precisely the correct volume of refrigerant is circulated to meet demand. The compressor’s power consumption varies as a result and can lead to significant energy savings.
|
 | Service-friendly FE micro-filter (Option)
Energy-saving refrigeration dryers from Kaeser Kompressoren can be equipped with a FE micro-filter. This makes installation significantly easier. Cold compressed air (+ 3 °C) flows through the FE micro-filter which causes oil vapours to condense to form oil aerosols that can then be reliably separated from the air. Separation and filtration performance can be monitored via electronic filter monitors and an optional monitor box for signal conversion.
|
 | Durable with exceptional value retention
The compressed air circuit is manufactured from high quality, durable materials. The copper-soldered stainless steel plate heat exchanger features generously sized piping and was specifically designed for use with compressed air applications. Service-friendly separator- and filtration- tanks made from stainless steel make filter changes simple.
|
|
TG - TI
